Fast Ethernet 8-Port 10/100Base-TX with 1-Port 100Base-FX or 10/100Base-TX Uplink Managed CPE Switch

Features 
Easy To Install And Use
With Auto-MDI/MDI-X and 10/100Mbps auto-senses support. If network device connected to the CPE Switch is never need crossover cables and adjusts running at 10Mbps or 100Mbps speed
 
Support IGMP Snooping V1/V2 
GMP snooping to quickly deploy IPTV service
 
Support Q-in-Q VLAN
With Q-in-Q VLAN stacking, the service providers can transport the encapsulated traffic for different customers without security risk
 
DHCP Auto-Provision with Text based Config file
Fulfill the deployment requirement and reduce the OPEX of device maintenance for service providers or operators
 
SNMP Power down trape
Popular SNMP trap message to rapidly identify network fault due to power outage and reduce truck rollls to save OPEX for service providers
 
Optional Cable Tray
This is a flexible option for FTTH installation. Normally the fiber is intentionally left longer than it actually needs. Cable tray can allow the fiber cable to have extra protection for the sensitive fiber.
 
Target Applications
SOHO & Residential CPE switch which requires simple network management for FTTX service deployment 

Specification

Interface

• LAN Port
  10/100Base-TX RJ45 x 8
• WAN Port
  100Base-FX x 1 or 10/100Base-TX 

Standards

• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-TX/FX
• IEEE 802.3x Flow Control
• IEEE 802.1q Tag VLAN
• IEEE 802.1p Priority

Product Specification

• Store and forward switching mechanism
• Auto-Cross over for MDI/MDI-X in TP port
• Auto-Negotiation in TP port
• Full/Half Duplex Mode Operation
• 2K MAC address table
• 80K bytes memory buffer

Switch Feature

• IGMP snooping V1/V2
• Bandwdith Control
• Port Isolation
• Tag VLAN
• Q-in-Q VLAN
• VLANs: Support to 16 VLAN Groups 
• QoS support 802.1p and ToS Classification 
• Priority Queues: 4 Queues

Management feature

• WEB / SNMP / CLI / Telent interface
• HTTP/TFTP Firmware update
• Storm Control
• DHCP Clinet
• DHCP Auto-Provision
• Text Based Config
• SFF-8472(digital diagnostic interface for SFP)
• Power down trap

LED

Power , Port Link/Act, Status
 
LED ON/OFF control button

Power Requirement
Power adaptor

• AC input: 100VAC~240VAC
• Frequency range: 50~60Hz
• DC output: 12V / 1.5A

Power consumption: 

• AC side: 9.3W
• DC side: 6.61W

Environmental Condition

• Operation: 0° ~ 50°C
• Storage temperature: -20° ~ 60°C
• Humidity: 5% ~ 90% non-condensing

Dimension & Weight

Main Unit:

• Size: 228 x 148 x 33mm (WxDxH)
• Shipping Weight: 1.6KG

Main Unit with Cable tray 

• Size: 228 x 191.5 x 46mm (WxDxH)

EMC/Safety
 
FCC class A, CE 
 
*For further reports, please contact us for update